Loading... Please wait...
Blog
Veneering both sides of a substrate. Veneering MDF vs. Solid Wood Stock. Veneering one side of a workpiece can cause warping.
"I am new to veneering. I have been doing my veneer research and there seems to be a varied opinion on applying veneer on both sides of the substrate-I will be applying veneer to solid stock verses particle or MDF. As for the veneer, I am planning to purchase the wood-backed veneer with the PSA. [...]
Ship times for wood veneers, paper backed veneers, wood backed veneers, with or without PSA Peel and stick adhesive.
I need a veneer rather quickly. How long does it take to ship veneer from Veneer Factory Outlet?GeorgeHi George,The ship times for our veneers vary according to various factors. Exotic veneers take longer to prep and ship than the “normal” veneers such as Walnut, Cherry, Oak, Maple.Paper backed veneers ship the fastest. If you order your veneer with [...]
Red Cedar Veneer. Red Cedar 2' x 8 and 4' x 8'. The red cedar veneer sheets are available in paper backed or wood backe, with or without PSA adhesive.
Hey Bob Morgan, do you have Eastern red cedar veneer? BradHi Brad,We have Red Cedar veneer, yes. We have the red cedar veneer in 2' x 8' and 4' x ' sizes.The Red Cedar veneer can be purchased with or without the PSA peel and stick adhesive, and the Cedar veneer sheets are available with [...]
Veneering the interior surface an exterior door. Very good chance of successfully veneering the interior surface of an exterior door, but not a certainty.
I have a full light 40" Insulated Steel Door, Outside will be painted. I would like to veneer the inside to match my interior Knotty Alder Doors and cabinets. Would your adhesive backed veneers work for this purpose? or would the temperature change between inside/outside affect the adhesive/veneer? Thanks in advance. CyndiCyndi,The short answer is “I don’t know”.But – I [...]
Can you end match 2 sheets of veneer without seeing the seam? Can you join 2 sheets of veneer to make a longer length?
Joining 2 sheets of veneer at the ends to make a longer length..........Q.Is it possible to match 2 sheets of veneer end to end to make a longer length, without seeing the seam where the veneer is joined?Re: “Can you hide the seam on a veneer joint?” , the short answer is “No” . On the other [...]
Removing a peel and stick veneer. How to remove psa adhesive from a veneered surface.
Re: PSA Peel and stick veneer. The psa adhesive that sticks the veneer sheet down is tenacious. I veneered my table with a veneer that has the psa peel and stick adhesive. I decided to remove the veneer and start over with a different species of veneer. I was able to get the psa [...]
Shold I use 2 ply wood backed veneer or the 10 mil paper backed veneer on my table top?
Is it better to use the 2 ply wood backed veneer or the paper backed veneer on my table top? I'm new to veneering and I need some advice. Thank you, SandySandy, The 2 ply wood backed veneer or the 10 mil (1/64") paper backed veneer would both be suitable for your project. If your [...]
Can I have my veneer shipped to a different address?
Bob - I'm going to a friend's home for 2 weeks. Can you ship my veneer to his address?Hi Charles, and thank you for your email. Yes, you can have your veneer shipped to his address, so long as it is in the United States.Regards,Regards,Bob MorganVeneer Factory OutletWood Veneer Factory Outlet
How Are Paper Backed And Wood Backed Veneers Shipped? Is It Necessary To Flatten The Veneer?
How are wood veneers shipped? How are wood veneers shipped? If the veneers are rolled how do I flatten the veneer? Thanks, Linda Hi Linda, and thank you for your question. The Paper backed veneers and wood backed veneers that we we sell here at [...]
Do Wood Grains, Tones, Colors Of 2 or More Sheets Of The Same Veneer Species Always Match?
Patrick:Hi Bob, If I order several veneer sheets of the same species, will all of them look alike?Bob Morgan:Thank you for your question, Patrick.The colors, tones, and grains of any wood veneer species can vary considerably. The only way to guarantee that 2 or more sheets of veneer of the same species are close matches is [...]
Recent Posts
- » How to join veneer sheets end to end to get long lengths without noticeable seams.
- » Veneering and Exterior Door, Will a re veneered exterior door hold up to the elements?, 2 ply wood backed veneer for re veneering an exterior door
- » Do I Need To Veneer Both Sides of a substrate? Veneering Only One Side Of a Substrate is Risky.
- » Veneering an Exteror Door, Mounting a veneered sheet of plywood to an exterior door, Using peel and stick veneer on an exterior door
- » Veneering a table toAre Veneer sheets rolled up for shipping? Should I try to duplicate a veneer pattern on a table top?